MARPOSS E9066 Remote control card

MARPOSS E9066 Remote control card

The weighing device in MARPOSS E9066 system uses a belt scale, with a total of 14 bins. The materials stored in each bin are not the same. Here, 1 # is selected for introduction. Under the silo is a frequency conversion controlled broadband feeder. The material flows through the broadband to the belt scale, and then to the belt of the mixer. Each scale has two load sensors, which are connected to the junction box, and a speed sensor. Each signal is transmitted to the weighing integrator through the junction box, and then the analog signal and pulse signal are transmitted to the PLC by the integrator. After processing, the PLC outputs the DO signal to the computer for monitoring and operation.

About us

We are professional company and we are expert in this business, we have highly experienced production team, or sales team, or purchase team, we have most advanced production line. We are reputable in the market.

Warranty: 365 days    Goods status: new/used      Shipping method: Courier delivery

MARPOSS E9066 debugging: E9066 requires many parameters to be adjusted, including calibration constant, establishment of test cycle, zero adjustment, automatic interval calibration, range, zero dead zone, PID setting, physical calibration, etc. According to the menu sequence, adjust the parameters in turn: the cumulative unit is t, and the flow unit is t/h; The maximum scale flow, namely the scale range, is set to 150 t/h, and the scale graduation is set to 0.1;

 This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/