ABB ASFC-01C is a switch fuse controller used to control and protect the circuits of switch fuses. The following is a product introduction about ABB ASFC-01C switch fuse controller:
Fuse control: The ASFC-01C switch fuse controller is used to control and monitor the status of switch fuses. It can receive signals from fuses, monitor current and status in real-time, and cut or reconnect as needed.
Protection function: This controller has a protection function, which can prevent faults and damage caused by circuit overload or short circuit. When the current exceeds the set threshold or a short circuit occurs, the ASFC-01C controller will immediately cut off the circuit to protect the relevant equipment and system.
Remote control and monitoring: The ASFC-01C controller typically supports remote control and monitoring functions. Users can operate the controller through external signals or remote interfaces, such as remotely reconnecting fuses or querying the status of fuses.
Alarm and fault display: The controller usually has alarm and fault display functions, which can timely notify users of information about fuse status and circuit faults. This helps users quickly identify and solve problems, and reduces downtime.
Programmability: ASFC-01C controllers usually have programmable functions that can be set and adjusted according to user needs. Users can configure the triggering conditions, action methods, and delay parameters of fuses based on specific application scenarios and requirements