1C31166G01 Implementing modular manufacturing

1C31166G01 Implementing modular manufacturing

Windows 2000 82551ER Driver Installation After installing Windows 2000 as described above, install the Ethernet drivers. To install the Ethernet drivers you must make a floppy disk to contain the files. 1. Place a blank floppy disk in drive A, then browse to the Ethernet folder on the VMIC distribution CD-ROM. 2. Double click makedisk.bat. This will format the floppy disk and copy files necessary for Ethernet drivers installation. 3. Open My Computer, then open Control Panel. 13. Insert CD-ROM 385-000079-000. 14. Select “Search For A Suitable Driver For My Device” and click Next. 15. On the Locate Drivers Files, specify location by selecting Browse, browse to your CD-ROM drive then to the Display folder and click Next. 16. Select OEMSETUP and click Open. 17. When the hardware wizard is displayed click OK (the path to OEMSET should be displayed in the Copy Manufacturers Files From box). 18. The Driver Files Search Results dialog box will now display 815E AGP. 19. Click next and complete driver installation.

From the control panel

open System and select the Hardware tab. 5. Click on the Device Manager button. 6. Right click Ethernet Controller within the Network Adapters menu and select Properties. 7. Choose Reinstall Drivers to start the upgrade device driver wizard. 8. Select Next to continue. 9. Ensure Search For Suitable Driver For My Device is selected, then click Next. 10. Click in the box next to Floppy Disk Drives and ensure the disk you created in steps 1 and 2 is inserted in the floppy drive, then click Next. 11. The Drivers File Search Results window should identify A:\NET551ER.int as the driver it found. Select Next to continue. 12. The Digital Signature Not Found box indicates this is not a Microsoft driver. Select Yes to continue. 13. After the files have been copied, select Finish to complete the driver installation. 14. You must now close the Driver Manager window, remove the floppy disk from the drive and reboot the system for the changes to take affect. 15. This process must be completed for both Ethernet adapters, 1 and 2.

Installation for Windows XP Professional

 When installing a new operating system, you need to make several choices. The Windows XP Setup Wizard and this document guide you through these choices. You will also learn how to connect your computer to a network. IMPORTANT: Before you begin, you should also read the file Read1st.txt, which is on the CD-ROM 385-000079-000. This file contains late-breaking information that was unavailable when the release notes and the product documentation was written, including preinstallation notes vital to the success of your installation. The following release notes describe how to run the Windows XP Setup Wizard and install Windows XP Professional on a single computer.