HITACHI LYA010A Module parameters that

HITACHI LYA010A Module parameters that

Characteristics of LYA010A

LYA010A is a module of Hitachi that can be used to build a PLC system, receive input signals, perform calculations based on user set program content, and output calculation results.

LYA010A can provide power to the main body and start operating the system, continuously executing calculations until power is cut off or the system stops operating.

LYA010A can store information that can be extracted or set as other information through externally connected devices.

The operation status of LYA010A can be confirmed by the LED or external device display of each unit 

  LYA010A is mainly used in PLC construction systems to achieve the following functions:

Receive the input signal given by the control target, perform calculations based on the user set program content, and output the calculation results. In addition, the operation results and program information can be saved in the internal output area.

Power up the body and start operating the system, continuously executing the operation until power is cut off or the system stops operating.

The information stored internally can be extracted or set as other information through externally connected devices. At the same time, when the system starts running, these information can be automatically initialized or saved by user settings.

The operation status can be confirmed by the LED or external device display of each unit.

  Basic unit: including DIP switch, RUN switch, and LED display, used to set CPU communication function and operation mode, and indicate operation, stop, and power system status.

Expansion unit: Similar to the basic unit, but with a greater number of interfaces, it can be used to expand input and output.

Terminal module: used to connect the power supply, perform and control signal extraction of the Japanese standard.

Expansion connector: used for expansion of input and output, excluding the 10-point type.

Operation status indicator: used to confirm the operation status, including the LED or external device display of each unit.