YOKOGAWA AIP830 distribution of the control system

YOKOGAWA AIP830 distribution of the control system

If an external 24 Vdc is used, the external power supply outputs must be rated to Class II at 30 Vdc or less and outputs must be fused with appropriately sized fuses (a maximum current rating of 100  V, where V is the supply’s rated voltage or 5 A, whichever is less). The discrete input isolation voltage is 500 Vdc to earth ground and 1000 Vdc to control common.This 125 Vdc 48/24 Discrete FTM is used with the 48/24 Discrete Combo Module (see Chapter 8 for MicroNet module information and Appendix A for FTM part number). Two MicroNet High Density Analog/Discrete cables are used to connect the FTM with the 48/24 Discrete Combo Module (see Appendix A for part numbers). The 48/24 Discrete FTM is then connected to either two 16Ch Relay Modules or one 32Ch Relay Module via a Low Density Discrete Cable(s) (See Appendix A for part numbers). All discrete Input wiring is through the 48/24 Discrete FTM. Contact wetting voltage must be supplied by an external 100-150 Vdc power (HV) source. The common for the 125 Vdc must be tied to the discrete input common. The discrete input isolation voltage is 500 Vdc to earth ground and 1000 Vdc to control common.

Discrete Input (with LEDs) FTM

Do not use internal 24 Vdc power (TB1-54) to power inputs. Use external 24 Vdc power source as shown in Chapter 8. Internal 24 Vdc doesn’t have sufficient current capability to power all LEDs at one time. This Discrete Input (with LEDs) FTM is used with the 48Ch Discrete Input Module (see Chapter 8 for MicroNet module information and Appendix A for FTM part number). One MicroNet Low Density Discrete cable is use to connect the FTM with the 48Ch Discrete Input Module (see Appendix A for part numbers). Always use an external 24 Vdc power source for energizing the inputs (See Chapter 8 for external power connection). The internal 24 Vdc power is not sufficient to power all LEDs.The 24/12 Discrete Module is used with MicroNet Discrete I/O Smart-Plus Module (see Chapter 8 MicroNet module information and Appendix A for FTM part number). The 24/12 Discrete I/O FTM has 24 discrete inputs connections and 2 groups isolated from each other of 6 relay drivers. Two FTMs connect to one MicroNet Discrete I/O Smart-Plus Module. Each FTM uses one MicroNet High Density Analog/Discrete cable to connect it with the MicroNet Discrete I/O Smart-Plus Module (see Appendix A for part numbers). All field connections use removable connectors for ease in replacing module in the field.

All discrete Input wiring

 is through the 48/24 Discrete I/O FTM. Contact wetting voltage may be supplied by the 48/24 Discrete FTM. Optionally, an external 18– 32 Vdc power (LV) source can be used to source the circuit wetting voltage. If the 24 Vdc internal power source is used for contact wetting, a jumper is required in terminal block TB9. If an external power source is used for contact wetting, the external sources common must be connected to the FTM’s discrete input common, terminal 49. If the external power supply to be used with voltage < 24 Vdc, jumper from TB9 is required to be removed. If the external power supply voltage >= 24 Vdc jumper from terminal block TB9 may stay – in this case power supply redundancy option can be used. Each of two groups of relay drivers (Discrete Outputs) require own external power supply. External Power Supply voltage: 5–60 Vdc, the same as for relays driven by the relay driver.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.