INHIBIT Push-button When the INHIBIT push-button is operated, the selected control card is placed in the inhibit mode. This prevents the operation of any configured relay output alarm functions. Inhibit can only be used if the Engineering Key is fitted to the Engineering Card, however, if the Engineering Key is subsequently removed the selected control card remains in the inhibit mode. 3.3.15 Engineering Serial Port The Engineering Serial Port is a miniature DIN socket which provides three functions: a. Connection point for the Engineering Key to unlock the engineers functions. b. Connection point for the External Engineering Interface which allows each control card to be configured by an external PC running the configuration software. c. Connection point for a serial printer which can be used to provide a hard copy of the control card configuration data and status.
IMPORTANT NOTICES
Zellweger Analytics Limited can take no responsibility for installation and/or use of its equipment if this is not done in accordance with the appropriate issue and/or amendment of the manual. 2. The user of this manual should ensure that it is appropriate in all details to the exact equipment to be installed and/or operated. If in doubt, the user should contact Zellweger Analytics Limited for advice. 3. The System 57 cards contain no user serviceable parts. Refer all servicing to qualified service personnel. 4. When inserting or removing system components ensure that the power is switched off. Failure to do this may result in damage to the system.
WARNING
For installations in the EU, refer to EN60079-14:1997, ‘Electrical Installations in Hazardous Areas (other than mines). Additionally, the code of practice regarding Selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen must be complied with. Refer to EN 50073. The above standards apply to the System 57 since the SENSORS may be installed in potentially hazardous atmospheres. In addition, appropriate local or national regulations shall be used.”
PLC programmable controller module, DCS card, ESD system card, vibration monitoring system card, steam turbine control system module, gas generator spare parts, etc. Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Overseas, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts
The products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper and printing, textile printing, machinery, electronic manufacturing, automobile manufacturing, plastic machinery, power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution, etc