WOODWARD 5501-467 Servo system module

WOODWARD 5501-467 Servo system module

Fieldbus Communication Interface (FCI) for S800 I/O Stations. No redundant media support. Replaced by CI810V1 CI820V1 Redundant Fieldbus Communication Interface (FCI) for S800 I/O Stations. Full redundant media support. Redundant FCI (communication interface) support. Long distance AF 100 support, see Advant Fieldbus 100 Length Concept on page 33 for details. New power supply contact. CI820 Redundant Fieldbus Communication Interface (FCI) for S800 I/O Stations. Full redundant media support. Redundant FCI (communication interface) support Long distance AF 100 support, see Advant Fieldbus 100 Length Concept on page 33 for details

Stand Alone Bus Administrator

Stand alone Bus Administrator Interface with redundant coaxial connectors and integrated modem. PR:G-PR:J - Full redundant media support PR:B-PR:F - Reduced redundant media support, maximum 4 meters cable difference between any two station on the bus, and on coaxial media only. CI627A Stand alone Bus Administrator Interface with redundant twisted pair connectors and integrated modem. PR:G-PR:J - Full redundant media support PR:B-PR:F - Reduced redundant media support, maximum 4 meters cable difference between any two station on the bus, and on coaxial media only

This section describes the components 

that enable the communication and the concepts of process data and message transfer. The major concepts for the implementation of communication and configuration are also described. The controllers (Advant Controller 70, Advant Controller 100 Series, Advant Controller 400 Series, and AC 800M) and other AF 100 Stations can be connected as stations on Advant Fieldbus 100. The AF 100 Stations comprise, for example, AC 100 OPC Server and S800 I/O Station. The AC 100 OPC Server provides a wide range of functionalities and when connected to Advant Fieldbus 100, it works as a PC-based operator station. S800 I/O Station is a remote I/O station. The Advant Fieldbus 100 provides communication between Advant Controllers and AF 100 Stations. The Advant Fieldbus 100 supports two different kinds of communication: • Process data—Dynamic data used to monitor and control a process • Message transfer—Used for parameters, program loading, and diagnostic purposes. An Advant Fieldbus 100 network is installed with single or redundant cables. In configurations with redundant cables, the data is always transmitted on both cables, but the receiver selects the cable from which it receives the data. This is done automatically by the hardware. Advant Fieldbus 100 is a high performance fieldbus which can be used to connect up to 80 Advant Controllers and/or AF 100 Stations (see Figure 10).

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on