SC510 is an ABB production controller, can be used to control and monitor industrial process. The following is SC510 basic tutorial:
Hardware installation
First, you need to install the SC510 controller in the cabinet, and connect the power supply and communication cable. Communication cable needs to connect to the corresponding equipment, such as sensors, actuators, etc.
Software installation
Next, you need to install the software SC510. Usually, ABB will provide an integrated development environment (IDE) called the Control Builder, used to write, compile, and upload the Control program. Before installing the software, please make sure that you already have a certain programming knowledge.
Write a program
Using the Control Builder written SC510 Control program. When programming, programming need according to the practical application scenario. For example, if the need to control the temperature of an industrial process, you can write a PID controller, and the sensor readings as input.
compiler
After writing the program, you need to compile a program into an executable file.