PILLAR CB6687-2L Interface module

The chart on the next page shows how the QTERM-II responds to each of the 256 possible values of characters which it can receive. Where a dot pattern is shown, sending the corresponding code will cause the QTERM-II to display the dot pattern at the current cursor location. Numbers in circles refer to these notes: ŒThese bytes are always ignored. They cannot be used for remapping custom characters. œThese bytes are normally ignored but may be used for remapping custom characters if desired. –This is a space character. Custom characters, and the codes to which they are assigned, are defined in the QDATA file (see Chapter 3). The following restrictions apply to assigning the codes: •Custom characters may not be mapped to any code from 07h through 1Bh (inclusive). This includes the Œ bytes as well as the control codes which are used by the QTERM-II.•Custom characters may be mapped to any other code, i.e. 00h through 06h and 1Ch through FFh. •The characters shown in the chart from 00h through 06h and at 1Ch are the default custom character definitions. You may change the character dot patterns and map them to different codes using the QDATA setup file.

Standard Customization 

There are four different standard customizations for the QTERM-II called Level 1, Level 2, Level 3 and Level 4. LEVEL 1: included with every QTERM-II, for no extra charge, is custom silkscreening of a company name, LED labels and the top row of keys. This no-charge screening has the following restrictions: • All text will be typeset in a Helvetica-style font. • No "reversed" text can be used, although two words can be screened onto the top row of keys. • Silkscreening will be done with black ink. LEVEL 2: if you need "reversed" text on the top keys, or you want a graphic logo, special font or different color ink, you need Level 2 customization: • Silkscreening can include your actual graphic logo. •Top keys can included reversed (shifted) functions. • You can specify the type font which you want to use. • You can specify any color of ink. There is a nominal one-time art charge for the special artwork and/or for the special color of ink. After this one-time charge, there is no extra charge on

There is a one-time NRE charge 

for the custom art for these all-custom legends, and the legends must be purchased in minimum quantities of 25 pieces. Note that you do not have to buy 25 terminals to have Level 4 customization! If desired, you can order the custom keypad legends and logo labels, which Beijer Electronics will then stock. We then install the keypad and logo labels on units as you order them. There is no additional charge for this service, beyond your original cost for art and keypad/logo labels. CUSTOM ENCLOSURE COLOR: If you wish to have a custom-color enclosure, you can select from 23 "standard" colors and pay only a one-time color charge. There is no additional unit charge, regardless of the number of terminals purchased (even just one unit!). If one of the 23 "standard" colors does not suit your requirements, contact Beijer Electronics for information on a non-standard color enclosure.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.