EMERSON 1C31125G02 Monitoring input module

Emerson 1C31125G02 is a part of the DeltaV control system manufactured by Emerson Process Management. Specifically, it is a DeltaV AI Card used for analog input signal processing. The card is designed to be used with the DeltaV system's M-series I/O subsystem and can handle up to 8 channels of analog input signals. It also features built-in diagnostics and can detect common faults such as broken wires and sensor failures. Overall, the 1C31125G02 card is a crucial component of the DeltaV control system, allowing for reliable and accurate analog input signal processing.

The 1C31125G02 module performs self-tests after a MicroNet system reset. If all tests pass, the 1C31125G02 will go out. If the Fault LED remains on or begins blinking, the module is faulty. The 68030 initializes the four communications processors after the self-tests. The Network Fault LEDs turn off after each communications processor has been initialized. If any of the 1C31125G02 remains on, the module is faulty. After the Network Fault LEDs have turned off, the controller module initializes the I/O nodes. Node initialization can take up to several seconds for a large network. The fault status of the module and each network channel may be annunciated through the application program. See Figure 11-5 for block diagram of the 4Ch LINKnet module.If a problem occurs with the LINKnet network, use Figure 11-25 (Troubleshooting Flowchart) as a guide to find and repair the problem.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.