NU8976A99 HIER466665R0099 HIEE320693R0001 module

Calibration 1. After configuring the DIP switches, connect the input to a calibrated DC source. Connect the output to the actual device load (or a load approximately equivalent to the device load) and apply power. Note: To maximize thermal stability, final calibration should be performed in the operating installation, allowing approximately 1 to 2 hours for warm up and thermal equilibrium of the system.2. Set the calibrator to the desired minimum input and adjust the zero potentiometer for the desired minimum output. 3. Set the calibrator to the desired maximum input and adjust the span potentiometer for the desired maximum output. 4. Repeat steps 2 and 3, as necessary, for best accuracy.The latest manuals can be downloaded from the HIMA website at www.hima.com. The revision index on the footer can be used to compare the current version of existing manuals with the Internet edition.

Structure and Use of this Manual 

The content of this manual is part of the hardware description of the HIMax programmable electronic system. This manual is organized in the following main chapters: ƒ Introduction ƒ Safety ƒ Product Description ƒ Start-up ƒ Operation ƒ Maintenance ƒ Decommissioning ƒ Transport ƒ Disposal This document addresses system planners, configuration engineers, programmers of automation devices and personnel authorized to implement, operate and maintain the devices and systems. Specialized knowledge of safety-related automation systems is required.

Formatting Conventions 

To ensure improved readability and comprehensibility, the following fonts are used in this document: Bold: To highlight important parts Names of buttons, menu functions and tabs that can be clicked and used in SILworX. Italics: System parameter and variables Courier Literal user inputs RUN Operating state are designated by capitals Chapter 1.2.3 Cross references are hyperlinks even though they are not particularly marked. When the cursor hovers over a hyperlink, it changes its shape. Click the hyperlink to jump to the corresponding position. Safety notes and operating tips are particularly marked.

Safety Notes 

The safety notes are represented as described below. These notes must absolutely be observed to reduce the risk to a minimum. The content is structured as follows: ƒ Signal word: danger, warning, caution, notice ƒ Type and source of danger ƒ Consequences arising from the danger ƒ Danger prevention The signal words have the following meanings: ƒ Danger indicates hazardous situation which, if not avoided, will result in death or serious injury. ƒ Warning indicates hazardous situation which, if not avoided, could result in death or serious injury. ƒ Warning indicates hazardous situation which, if not avoided, could result in minor or modest injury. ƒ Notice indicates a hazardous situation which, if not avoided, could result in property damage.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.