BENTLY 9200-06-02-10-00 Monitor module

When a Power Controller is connected to more than one Power Shelf, Power Shelves should have their supplies applied in turn, e.g. power up first Shelf (idents 1-3), followed by Shelf two (idents 4-6) etc. This ensures that the Power Pack addresses are not duplicated.If a Power Shelf is not fully populated, Power Shields are used to cover unused spare slots Power Supplies, Information Technology Equipment Including Electrical Business Equipment - Component E223750 Power Supplies, Medical and Dental - Component

Panel Mounting – display is mounted in a panel cutout located in the same cabinet or up to 100 feet away from the 3500 System. (Up to 4000 feet away from the 3500 System when using the External Power Supply).

Power Shelf Interconnect

 A ribbon cable is required to connect Power Shelves together in order to current share, or to connect shelves to a Power Controller. The supplied ribbon cable has 5 connectors, to allow the maximum of 4 Shelves and a Power Controller to be connected. Do not connect the TC-323 cable between ‘A’ and ‘B’ supplies or between two sets of Shelves which connect to separate busbars. The supplies will attempt to share current between the two busbars, which may damage the Power Packs and Shelves’ sensing circuits. Unused connectors on the TC-323 cable should be tied back and left unused.

Independent Mounting – display is mounted flush against a wall or panel and located up to 100 feet away from the 3500 System. (Up to 4000 feet away from the 3500 System when using the External Power Supply).

The 3500/93 System Display

 is configured using 3500 Rack Configuration Software. The display can be mounted in any of four ways: 1. Face Mounting – display installs directly over the front panel of any full size 3500 rack using a special hinged support. This permits access to the rack’s buffered output connectors and userinterface buttons and switches without disconnecting or disabling the display. Note: For this mounting option only, the Display Interface Module (DIM) must be installed in slot 15 (right-most slot) of the rack. The Face Mounting option is not compatible with the 3500 Mini-rack. 2. 19-inch EIA Rack Mounting – display is mounted on 19-inch EIA rails and located up to 100 feet away from the 3500 System. (Up to 4000 feet away from the 3500 System when using the External Power Supply).

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.