DS200DCFBG1BNC Gas combustion engine module

Up to two displays can be connected to each 3500 rack and each display requires one empty 3500 rack slot for insertion of its corresponding DIM. When the display is not face-mounted, the cable connection between the DIM and the Display can be made from the front of the 3500 rack or from the I/O module at the rear of the rack. Applications that require a cable longer than 100 feet must use the External Power Supply and Cable Adapter. Applications that use the back lighted Display Unit must use the External Power Supply. There are two External Power Supplies: one for connection to 115 Vac and the other for connection to 230 Vac. The External Power/Terminal Strip Mounting Kit eases installation of External Power Supplies. The External Power/Terminal Strip Mounting Kit is designed to fit in the Independent Mount Housing. The Kit streamlines installation of an External Power Supply in both the Independent Mount Housing or a user supplied housing

Reflective 640 x 200 Dots LCD

Displays data in graphical and text format. LCD module is reflective FSTN dot matrix type without backlight. Ambient white light is required for acceptable visibility. Best visibility is under indirect sunlight conditions, LCD visibility decreases with corresponding decrease in ambient light level. LCD exhibits acceptable visibility under normal office lighting levels. Transflective 640x200 Dots LCD: Displays data in graphical and text format. LCD module is transflective FSTN dot matrix type with white electroluminescent backlight.Supports Bently Nevada proprietary protocol and Modbus® protocol based on AEG PI-MBUS300 Rev. E Reference Manual.version. The system data of AC500-XC Ä Chapter 5 “System data AC500-XC” on page 7 are applicable to the XC version. Only additional details are therefore documented below. The technical data are also applicable to the XC version.

Power supply units

 For the supply of the modules, power supply units according to SELV or PELV specifications must be used.Improper installation can lead to death by touching hazardous voltages! To avoid personal injury, safe separation, double or reinforced insulation and separation of the primary and secondary circuit must be observed and implemented during installation. – Only use power converters for safety extra-low voltages (SELV) with safe galvanic separation of the primary and secondary circuit. – Safe separation means that the primary circuit of mains transformers must be separated from the secondary circuit by double or reinforced insulation. The protective extra-low voltage (PELV) offers protection against electric shock

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.