XDD501A101 3BHE036342R0101 Analog output card

Threshold tests These tests are essentially a sub-set of the site commissioning plan. As such, they will vary widely depending on the number of channels configured, the sensor type, and so on. The levels used have to be determined for each particular installation. An example for one channel of a vibration alarm is given below. 1- Disconnect the IOC4T from the sensor cables. 2- Simulate an N1 vibration signal at a site specific frequency for 100% RPM. 3- Inject a signal at (0.8 x alarm level) and verify that the system does not trip. 4- Inject a signal at (1.2 x alarm level) and verify that the system does trip. System maintenance should be performed following the guidelines in the MPS Hardware Manual (Standard Version) MAMPS-HW/E (see 1.5 - Applicable Documents). When the VM600 is taken offline, the attached system and equipment are no longer protected. Therefore, maintenance should only be undertaken by authorized personnel respecting the overall plant operations procedures.

DISPOSAL

 If it is decided to scrap a VM600 system, then it must be disposed of in an environmentally friendly manner. In European Community countries, the Waste Electrical and Electronic Equipment (WEEE) directive is applicable. • According to the WEEE Directive 2002/96/EC, all waste electrical and electronic equipment should be collected separately and then treated and disposed of in accordance with the best available and environmentally friendly techniques. Waste electrical and electronic equipment may contain substances hazardous to the environment (and to humans) but it is also a valuable resource of new raw materials. Therefore, it is important to collect electrical and electronic waste separately from other waste.

Customer Feedback

 As part of our continuing commitment to improving customer service, we warmly welcome your opinions. To provide feedback, please complete the Customer Feedback Form on page 5-5 and return it Vibro-Meter’s main office If the product has to be returned to Vibro-Meter for repairs, then: 1- Complete this failure report form. 2- Attach a photocopy of this report to the faulty unit and retain the original copy for your records. 3- Send the product and the attached failure report form to Vibro-Meter by registered post.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.