Home > Product > DCS control system > HONEYWELL 51202329-606 Analog input module

  • HONEYWELL 51202329-606 Analog input module
  • HONEYWELL 51202329-606 Analog input module
HONEYWELL 51202329-606 Analog input module HONEYWELL 51202329-606 Analog input module

HONEYWELL 51202329-606 Analog input module

HONEYWELL 51202329-606 Analog input module

Follow Steps 1 through 7 to replace computer interface modules. Observe the steps listed in the SPECIAL HANDLING portion of this manual when handling computer interface modules. 1. Turn the 2 latching screws on the defective computer interface module ½ turn either way to release them. In the case of the INICI03 INFI-NET to Computer Interface, the INICT03 and IMMPI01 or IMMPI02 modules are connected by cable and must be disconnected. 2. Grasp the screws and slide out the module or modules. 3. If necessary, disconnect the cable connecting the modules and remove only the defective module. 4. Set any dipswitches and jumpers on the replacement module to match the settings of the removed module. 5. If necessary, connect the replacement module with any interconnecting modules.

Hold the module 

or modules by the faceplate and slide them into their assigned slots; push until the rear edges of the modules are firmly seated in the backplane connectors. 7. Turn the 2 latching screws on the module or modules ½ turn to lock the modules in place. Modules are locked into the module mounting unit when the open end of the slots on the latching screws face the center of the module faceplate.

Bailey Controls is ready to help in the use and repair of its products. Contact the nearest sales office to make requests for sales, applications, installation, repair, overhaul and maintenance contract services.

TERMINATION UNIT OR MODULE REPLACEMENT PROCEDURES 

To replace the following termination devices, refer to the appropriate instructions for step by step replacement procedures and spare parts information: • NTCL01 Communication Termination Unit. • NICL01 Communication Termination Module. • NTMF01 Multi-Function Controller Termination Unit. • NIMF01 and NIMF02 Multi-Function Controller Termination Modules. • NTMP01 Multi-Function Processor Termination Unit. • NIMP01 and NIMP02 Multi-Function Processor Termination Modules.

The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

微信图片_20221018155010.jpg

Obtain the latest price of HONEYWELL 51202329-606 Analog input module