KUC711AE101 3BHB004661R0101 3BHB004791R0101 module

This manual describes how to Install and Operate the Woodward EGCP-2 Engine Generator Control Package, models 8406-120 and 8406-121. Associated publications: • 26175—Application Manual • 26181—Communications Manual • 26108—Security Levels Guide • 03219—Product Specification Regulatory Compliance General Installation and Operation Notes and Warnings • The EGCP-2 is suitable for use in non-hazardous locations only. • Wiring must be in accordance with applicable electrical codes and in accordance with the authority having jurisdiction. • Field wiring must be suitable for at least 90 °C. • Connect ground terminal to PE (Protective Earth). • More than one live circuit (see wiring diagram)

The EGCP-2 is a microprocessor 

based complete generator load control and engine management package. It will operate with a voltage regulator and various speed controls to automate and protect diesel or gas engine based generator sets from 400 to 3600 rpm. Designed for generator sets up to 30,000 kW, the EGCP-2 can be configured to operate stand-alone or utility paralleled. A network of EGCP-2 controls is capable of controlling up to eight un-manned generator sets for backup power, baseload, or peak shaving applications. Engine Control • Engine Pre-glow Control • Fuel Solenoid Control • Engine Starter Control (Cranking) • kVA Controlled Cool-down Timer • Oil Pressure Monitoring • Water Temperature Monitoring • Battery Voltage Monitoring • Speed Monitoring with Overspeed Protection • Idle /Rated Relay

Synchronizing 

• Digital signal processing to eliminate problems induced in systems with high SCR content causing multiple zero crossing of voltage waveforms. • Adjustable maximum phase window, voltage window, and dwell times— windows as small as 2° phase error and 0.1% voltage matching respectively. • Safe dead bus closing logic internal to the control. • Multiple shot re-closing with adjustable time delays, auto-resynchronizing, and synchronizer time-outs all available. • Manual voltage and speed adjusts for manual synchronizing (Sync-Check still active during manual parallels). • Synchronization across generator and mains breakers.