XXD129A01 3BHE012436R0001 PEC800-BP module

Main Volt High Alarm 

The Main Volt High condition will cause a response defined by this set point. 

The available responses are: 

• Disabled • Warning

 • Loss of Mains 

• Loss of Mains with Alarms Main Volt Low Limit 

• Alarms when Mains Voltage drops below set point. •

 Alarm can be set for Loss of Mains. 

• If Mains Voltage is below Low Limit, Mains are not considered stable, and the EGCP-2 control will not issue a mains breaker closure command. Main Volt Low Alarm The Main Volt Low condition will cause a response defined by this set point.

 The available responses are:

 • Disabled 

• Warning 

• Loss of Mains

 • Loss of Mains with Alarms

Main Frequency High Limit 

• Alarms when Mains Frequency exceeds Alarm Set Point. 

• Alarm can be set for Loss of Mains.

 • If Mains Frequency is above High Limit, Mains are not considered stable, and the EGCP-2 control will not issue a mains breaker closure command. Main Freq High Alarm The Main Frequency High condition will cause a response defined by this set point. 

The available responses are: 

• Disabled 

• Warning 

•Loss of Mains • Loss of Mains with Alarms

Main Frequency Low Limit 

• Alarms when Mains Frequency drops below set point.

 • Alarm can be set for Loss of Mains. 

• If Mains Frequency is below Low Limit, Mains are not considered stable, and the EGCP-2 control will not issue a mains breaker closure command. Main Freq Low Alarm The Main Frequency Low condition will cause a response defined by this set point. 

The available responses are: • Disabled • Warning • Loss of Mains • Loss of Mains with Alarms