HONEYWELL CC-PDOB01 51405043-175 module

Technical Support is available through our many worldwide locations or our authorized distributors, depending upon the product. This service can assist you with technical questions or problem solving during normal business hours. Emergency assistance is also available during non-business hours by phoning our toll-free number and stating the urgency of your problem. For technical support, please contact us via telephone, email us, or use our website and reference Customer Services and then Technical Support.

 Product Training is available at many of our worldwide locations (standard classes). We also offer customized classes, which can be tailored to your needs and can be held at one of our locations or at your site. This training, conducted by experienced personnel, will assure that you will be able to maintain system reliability and availability. For information concerning training, please contact us via telephone, email us, or use our website and reference Customer Services and then Product Training

Field Service 

engineering on-site support is available, depending on the product and location, from one of our many worldwide locations or from one of our authorized distributors. The field engineers are experienced both on Woodward products as well as on much of the non-Woodward equipment with which our products interface. For field service engineering assistance, please contact us via telephone, email us, or use our website and reference Customer Services and then Technical Support.

Adjustment Procedure

 1. Start the generator with the EGCP-2 NOT connected and set for rated voltage. Terminals 2 and 3 on the AVR must be jumpered when doing this.

 2. Connect the EGCP-2 as shown.

 3. Start Generator

 4. Adjust the Volts Bias Offset for rated voltage.

 5. Press ENTER to save this value

 6. Close the Voltage Raise discrete input (4) and verify the EGCP2 can move the generator voltage in the increase direction. 

7. Close the Voltage Lower discrete input (5) to verify the EGCP-2 can drive the generator voltage in the decrease direction