The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

SCXI-1102 Voltage input mold piece

Touch Screen Display The QuickPanel+ features a 7” LED Backlit LCD touchscreen display with two-point touch. The touch technology is based on projected capacitance. This allows tracking of the finger without pressured contact conducive to smooth scrolling and multi-touch gesturing capability. Display brightness and backlight operation can be set using the operating system Control Panel. 5.1.1 Adjusting the Display Brightness 1. In the Control Panel, double tap Display and choose the Brightness tab. The Brightness dialog box appears. 2. Drag the Brightness slider between Lowest and Highest. 3. Tap OK to exit the control panel. 4. To save the settings, run the Backup utility. 5.1.2 Configuring the Backlight 1. In the Control Panel, double-tap Display and choose the Backlight tab. The Backlight dialog box appears.Select Auto turn off backlight while on external power. 3. Tap OK to exit the control panel. 4. To save the settings, run the Backup utility.

Calibrating the Touch Screen

The touchscreen on the QuickPanel+ comes out of the box pre-calibrated but may need to be recalibrated if there are any issues with touch screen responsiveness. 1. Go to the QuickPanel+ Setup tool. 2. Click on the TouchPanel tab. 3. Select Recalibrate Touch Screen. 4. After this is complete, select Recalibrate Touch Sensor. 5. During the calibration of the touch screen sensor a prompt to activate a switch located in the battery compartment will appear. 6. Remove the battery cover and press the switch.

Keyboard The QuickPanel+ can be configured to use either or both a hardware keyboard and a software emulation keyboard as operator data input devices. Typically, an external hardware keyboard is used when in a development mode, while the included Soft Input Panel is more applicable in an operational environment. 5.2.1 External Keyboard (optional) Any USB-compatible keyboard can be used as an input device for the unit. The USB driver for the keyboard is included with the operating system and no setup is required. To use an external keyboard, simply plug and play. 5.2.2 Soft Input Panel The Soft Input Panel (SIP) is a touch screen version of a standard keyboard, which can be used in place of a standard hardware keyboard. An icon in the system tray lets you view or hide the SIP.