3BHB000652R0001 3BHB003431R0001 KUC720AE01 module

Contents of this chapter This chapter shows the connections between the switch-disconnector, the charging controller and one or two inverters. The BSFC-02C is supplied from a 115 V AC or 230 V AC power source, and the BSFC-12C is supplied from a 24 V DC power source.Ethernet fieldbus communication interface. Supervisory functions of I/O ModuleBus. Isolated power supply to I/O modules. OSP handling and configuration. Single/redundant 24V power supply with built-in voting and power supply supervision. Hot Configuration In Run. HART pass-through and Sequence of Events. Use as single or redundant, together with TC810 and TU860.

If this product has the CE mark 

it is approved for installation within the European Union and EEA regions. It has been designed and tested to meet the following directives.This product is tested to meet Council Directive 89/336/EEC Electromagnetic Compatibility (EMC) and the following standards, in whole or in part, documented in a technical construction file:

 • EN 50081-2EMC – Generic Emission Standard, Part 2 – Industrial Environment

 • EN 50082-2EMC – Generic Immunity Standard, Part 2 – Industrial Environment This product is intended for use in an industrial environment

This product is tested to meet Council Directive

 73/23/EEC Low Voltage, by applying the safety requirements of EN 61131–2 Programmable Controllers, Part 2 – Equipment Requirements and Tests. For specific information required by EN 61131-2, see the appropriate sections in this publication, as well as “Industrial Automation Wiring and Grounding Guidelines For Noise Immunity,” Allen-Bradley publication 1770-4.1 Open style devices must be provided with environmental and safety protection by proper mounting in enclosures designed for specific application conditions. See NEMA Standards publication 250 and IEC publication 529, as applicable, for explanations of the degrees of protection provided by different types of enclosure.