The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

BENLTY 125840-01 Monitor card

The FIP Bus Controller can serve as an I/O controller for devices such as Series 90-30 I/O modules in remote I/O nests and Field Control I/O modules located in I/O Stations on the FIP bus. In addition, the FIP Bus Controller provides high-level TCP/IP communications and generic messaging support. Dual bus connectors on the front of the FIP Bus Controller support the use of an optional redundant bus cable. The FIP bus may serve up to 128 devices, including:
Field Control Stations, Field Control I/O modules that are interfaced to the bus via a FIP Bus Interface Unit (BIU).
Series 90-70 and Series 90-30 PLCs interfaced to the bus by FIP Bus Controllers.
Remote I/O Racks, Series 90-30 I/O racks interfaced to the bus via FIP Remote I/O Scanner Modules. Each remote I/O rack can include one 5- or 10-slot main rack, one 5- or 10-slot expansion rack and any mix of discrete and analog I/O modules.
Generic Devices, such as general-purpose computers that are interfaced to the bus via a FIP Interface Module.

A Series 90-70 PLC FIP Bus Controller (catalog number IC697BEM742 or IC697BEM744) is used to interface a FIP bus to a Series 90-70 PLC. Operation of the network is based on WorldFIP (EN50170) exchanges.

Versions of the FIP Bus Controller 

There are four different FIP Bus Controllers for the IC697 family of PLCs:
IC697BEM742: a full-slot module for operation on a 1.0MHz FIP or WorldFIP network.
IC687BEM742: a half-slot module for operation on a 1.0MHz FIP or WorldFIP network.
IC697BEM744: a full-slot module for operation on a 2.5MHz WorldFIP network.
IC687BEM744: a half-slot module. This module has a half-width faceplate for use in an integrated rack for operation on a 2.5MHz WorldFIP network.Number of FIP Bus Controllers in a Series 90-70 PLC Up to 31 Bus Controllers of any kind can be included in a Series 90-70 PLC system. Of these, a maximum of four (4) may be FIP Bus Controllers. An FBC cannot be placed in a PLC expansion rack.Remote I/O Scanner and modules in the I/O nest are configured using the CIMPLICITY Control 90 Programming Software (rel. 2.0 or later).PLC system is configured using the CIMPLICITY Control 90 Programming Software (rel. 2.0 or later).