The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

BENTLY 3500/15 Power supply module

The FIP Bus Controller is a rack-mounted Series 90-70 PLC module. It is available in full-slot (shown below) and half-slot widths. Both types are functionally identical.The FIP Bus Controller has six status LEDs, a Restart pushbutton, an RS-485 serial port, and two identical FIP bus connectors. Status LEDs The 6 LEDs on the front of the FIP Bus Controller display module status and communications activity. Restart Pushbutton The Restart button is used to Restart the module or Reload the software and Restart the module. Serial Port The 15-pin serial port is used to connect a computer for upgrading the operating firmware of the Bus Controller. FIP Bus Connectors The two 9-pin connectors on the FIP Bus Controller provide for attachment of one or two FIP busses. The two busses provide a redundant bus capability

Configuring the Network and its Devices 

Chapter 3 explains how to configure the FIP network. The Network Configuration Tool is used to define network segments and identify devices. The Network Configuration tool provides built–in defaults that can be used to simplify configuring the network. Customized configurations can also be created. The CIMPLICITY Control 90 Programming Software is used to configure each Series 90-70 PLC, FIP Remote I/O Scanner and FIP Field Control I/O Station on the network. Understanding How the FIP Bus Controller Operates Chapter 4 addresses the basics of FIP Bus Controller operation. It describes how the Bus Controller interfaces the functions of the Series 90-70 PLC with the regular cycle of the FIP bus. The differences between Asynchronous operation and Synchronous operation of the FIP network are also covered in this chapter. Because selecting either Asynchronous or Synchronous operation is a major step in configuring the system, the distinction between them should be understood first.