The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

BENTLY 3500/15 127610-01 Power supply module

Basic Configuration Basic configuration uses as many as possible of the defaults built-into the Network Configuration Tool. Basic configuration includes:
standard predefinition of the exchanges on the I/O module level,
standard creation of exchanges with the remote I/O rack correspondents: create the hardware module with the Hardware Configuration Tool perform a build make updates on the subscriber I/O define exchanges by selecting the segment,
default network segment,
default connection of a device,
default characteristics of I/O modules,
that remote I/O rack correspondents consume by default all the TVAs of the I/O modules. The configuration defaults assume standardized definitions for I/O data exchanges, network segment, device connection, and I/O modules.Custom Configuration For higher performance, you can customize the configuration by:
carefully selecting the correspondents for exchanges,
modifying transport time slots,
adjusting the network and device operating parameters.
modifying the list and characteristics of transport time slots,
modifying the list of TVAs that can be exchanged for each device category. It is important to fully understand both the device implementation restrictions and the consequences of modifying the default exchange definitions on the performance of the system.

Using the Network Configuration Tool

 The Network Configuration Tool provides the functions listed below. The ability to access a specific function depends on what is presently selected (for example, an entire network or an individual device on that network).
File New Project Open Project Close Project Save Segment Plus these standard functions: Print, Print Preview, Print Setup, Properties, and Exit
Edit New Segment New Device Lock Plus the editing functions: Cut, Copy, Paste, Delete, Rename You can use the Edit functions to copy and paste a segment into any project. Copying enables data from the copied network segment to be reused. You can move a network segment from one project to another (using cut and paste commands). You can also delete, lock or unlock, save, rename, and print a network segment.
Association Update Setting Restore These functions are used to integrate device hardware configurations with the FIP Network Configuration.
Tools Predefine Exchanges –sets up MPS exchanges between network subscribers. Edit Exchanges – edits MPS exchanges after associating hardware configurations with the network configuration. Edit HW Configuration – brings up the CIMPLICITY Control 90 software. Build –creates the binary files for the Bus Arbiter program, FBC70, and remote I/O racks. Export Configuration
Plus: View, Window, Help