The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

PROSOFT MVI56-MNETR module

When Alibi is selected in the Report Type field and the Table Search softkey is pressed, allow some time for the Alibi Search View table to populate. 4. When the table Search View is on screen, the PRINT softkey displays again. Pressing PRINT will print the entire contents of the table. Calibration Test The IND780 terminal provides a programmable Calibration Test sequence that can contain up to 25 individual steps. The Calibration Test is designed to lead the tester through a set of predetermined steps and compare the terminal calibration with known test weights. The test is accessed by pressing the CALIBRATION TEST softkey on the home page or as an Application key (A1—A4). A screen (Figure 2-30) displays, H including a field for the name of the tester.Use the NEW and EDIT softkeys to enter the weight and serial number of each test weight to be used. The weights and weight units should match those programmed for the Calibration Test. This information provides a traceable record for the calibration test. Once the test weights are entered, return to the Calibration Test screen by pressing the EXIT softkey . The calibration test is started by pressing the START softkey . A display is shown (Figure 2-32) that provides the active scale weight, the target and tolerance H weight values and, at the bottom, instructions (as to where to place the weights).

Alibi Memory Direct Access 

The Alibi Memory stores transaction data that can be retrieved in order to verify transaction information. The information stored in the Alibi Memory includes: • Transaction counter value • Date and time of transaction • Gross, net, and tare weights including units of measure To view the Alibi Memory: 1. Depending which is programmed as one of the home page softkeys, press the Alibi softkey , or press the REPORTS softkey and select Alibi Memory from the report selection box. 2. Press the VIEW TABLE softkey . The Alibi Search View screen displays, with two Search Fields and associated Data limiting boxes. 3. To limit the data: A. Use the Search Field selection box to select a desired search field. The Alibi Search screen has two sets of limiting fields, allowing the search to be further limited. HTable 2-8 lists the options by Table, with default values indicated with an asterisk.Use the numeric keypad to enter the limiting factor in the text box (the * character is the “wild-card” character and returns all results). D. For the Tare and Target Tables, select the Sort By method. Sort By offers the same choices (Table 2-9) as the Search Field.