GE UR8GH Integrated protection device

Never touch the electrical connection points of a component while the power is turned on. ⇒ Cover live parts properly before switching the equipment on so they cannot be touched. Covers provided with the equipment must be installed before operating the equipment to prevent contact with live parts. The equipment may only be operated with the covers designed for shock-hazard protection. ⇒ A GFCI protective device (ground fault circuit interrupter) cannot be used for AC drives! Protection against indirect contact must be ensured by other means, for example, by using an overcurrent protection device in accordance with relevant standards. European countries: in accordance with EN 50178/ 1994, section 5.3.2.3

High discharge current!

 Danger to life or risk of bodily injury! ⇒ All units and the motors must first be connected to a grounding point with the ground wire or must be grounded themselves before switching on power. ⇒ The discharge current is greater than 3.5 mA. A permanent connection to the power supply system is therefore required for all units. European countries (EN 50178/1994, section 5.3.2.3). ⇒ Before startup operation always connect the protective conductor or the ground conductor. Otherwise the housing may harbor high voltages.

Protection against shocks 

caused by safety extra-low voltage (SELV) All connectors and terminals on INDRAMAT products with voltages from 5 to 50 volts are safety extra-low voltages offering a shockproof design to meet the following standards:

 • international: IEC 364-4-411.1.5 

• European countries in the EC: EN 50178/1994, section 5.2.8.1

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,

Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.