This indicates that the condition WROT ≤ WZW, DKC+CZM has been fulfilled. If the same amount of energy were released via a bleeder, then, due to the cycle time, a continuous regenerative power of 243 Watts would result. This would remain within the cabinet in the form of dissipated power.
INDRAMAT recommends a 10A automatic circuit breaker of 10 A with tripping characteristics for DC24V NTM power supplies. Please use the line filter NFE01.1-250-006 for interference suppression
Application recommendations
If there is no external DC24V control voltage available, then INDRAMAT recommends the use of NTM power supply units. • The power supplies contain an overvoltage safety switch with automatic shutdown. After the automatic shutdown device has responded, operation can be resumed by switching the power supply off and on again briefly. • The power supplies always function with a starting current limiter. However, if you switch on and off again within a period of 10 s, the starting current limit may not work! • The NTM01.1-024-004 and NTM01.1-024-006 power supplies make it possible to measure the voltage applied to the load via sensor cables. If there is a voltage drop, the power supply will increase the output voltage accordingly
Live parts (greater than 50 V)!
Electric shock on contact! ⇒ Before startup operation, the protective ground conductor must first be permanently connected to the filter and then grounded! ⇒ Before touching bare connection leads and terminals, isolate the filter with the connected consumers from the power source or switch them off. Allow time for discharging! Do not work on connecting cables until then! ⇒ Due to the high discharge current of the filter, operation is not permitted without a connected protective conductor! This is why the filter may only be operated with a permanently protective conductor with a cross section ≥10 mm2
Superior products
Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,
Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts
Application industry
Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.