A-B 1753-L32BBBM-8A Control module

• These outputs are scaling-indepentent and always relate to the motor shaft. The scaling o the signals is possible in terms of the evaluation parameters P-0-0422&P-0-0425. They are, with the expanded signal selection with predefined signals, fixed as a factor with four decimal places and have a permanent reference unit to the selected signal

The serial communications with drive via the serial interface can implement either (connector X2): 

• an ASCII protocol (see Ecodrive-1) or 

• via SIS protocol (Serial Indronat-Schnittstelle) The protocol is automatically identified

System architecture

The versatility and flexibility of this valve block system enables Bosch Rexroth to support your automation tasks. The valves are completely assembled and tested according to your requirements; the electrical connection is made via decentralised bus modules. The valve block system in the local and external pilot control versions is then ready for use. Its modular construction allows existing systems to be expanded or converted at any time. The valve block system's operating instructions are composed of individual components.

The bus module PROFIBUS-DP 

(RMVDP/F and RMVDP/F_7/8") is exclusively designed for operation as a bus participant (slave) on a PROFIBUS-DP bus system according to EN 50170. A twisted, shielded pair of wires is used as a field bus cable. The bus length can be up to 1.2 km (without a repeater) depending on the transfer rate. Without a repeater, 32 bus particpants (slaves) per segment are connectable. With repeaters, it is expandable up to 127 bus partcipants (slaves). The DP station address of the bus module is set using the two rotary switches, S1 and S2. The bus module automatically adjusts to the bus speed between 9.6 kBaud and 12 MBaud. The supply voltage for logic and valve control is monitored. If the value falls below the set threshold, an error signal is generated and the diagnostic information is reported via LEDs.

after-sale service

Focus on sales of imported industrial automation equipment

1 year professional warranty service

Our large inventory contains current and outdated products in the automation industry, if you are looking for new leftovers Products. We are knowledgeable and friendly about all outdated and legacy automation, our remaining products or discontinued parts Our internal team tests each part before delivery. Good colleagues can help you get what you need,All parts sold by AMIKON are actually in stock. With our competitive prices, we will This makes emergency transportation a solution to emergency shutdown. Haodi provides you with the necessary parts inventory A simple solution to the situation.