ABB PU515 3BSE013063R1 Pulse link module

The 24 Volt DC Positive/Negative Input Module provides 32 input points in four isolated groups of eight points each. The input current–voltage characteristics meet IEC standard (type 1) specifications. LED indicators that show the ON–OFF status of each point on the logic (PLC) side of the circuit are located at the top of the module.

▪ 32 Points – Four isolated groups of eight points each 

▪ Positive/Negative Logic Compatibility 

▪ Proximity switch compatible 

▪ Input filter selectable – 1 ms or 10 ms 

▪ First input configurable as interrupt

Input Characteristics 

This module has both positive and negative logic characteristics – it sinks or sources current from the input device to the user common. The input device is connected between the power bus and the module input as shown above. This module is compatible with a wide variety of input devices, such as: ▪ Pushbuttons, limit switches, selector switches; ▪ Electronic proximity switches, both 2 and 3–wire. In addition, inputs on this module may be directly driven by a compatible voltage output module. The input circuitry provides sufficient current to ensure reliable operation of the switching device. Input current is typically 10mA in the ON state. An input in the OFF state can accept up to 2mA leakage current without turning on

Proximity Switch Compatibility 

3–wire proximity switches are easily applied, since they provide low voltage drop in the ON state and low leakage current in the OFF State. 2–wire proximity switches derive their power from the signal connections; thus both the ON state voltage and the OFF state leakage current are higher than for 3–wire devices. This module is compatible with many such 2– wire devices; however each device type must be carefully evaluated for compatibility in both the ON and OFF states.

after-sale service

Focus on sales of imported industrial automation equipment

1 year professional warranty service

Our large inventory contains current and outdated products in the automation industry, if you are looking for new leftovers Products. We are knowledgeable and friendly about all outdated and legacy automation, our remaining products or discontinued parts Our internal team tests each part before delivery. Good colleagues can help you get what you need,All parts sold by AMIKON are actually in stock. With our competitive prices, we will This makes emergency transportation a solution to emergency shutdown. Haodi provides you with the necessary parts inventory A simple solution to the situation.