GE DS200TCQBG1A Multiplexer switch card

The arc end condition file of CMOS memory was damaged. The data stands for the file No. Initialize the arc end condition file in the maintenance mode. Load the saved arc end condition file in the external memory unit and restore. 4009 MEMORY ERROR (ARC AUX COND FILE) [Decimal Data] The welding condition assistance file of CMOS memory was damaged. The data stands for the file No. Initialize the welding condition assistance file in the maintenance mode. Load the saved welding condition assistance file in the external memory unit and restore. 4010 MEMORY ERROR (COM-ARC COND FILE) [Decimal Data] The COM-ARC condition file of CMOS memory was damaged. The data stands for the file No. Initialize the COM-ARC condition file in the maintenance mode. Load the saved COM-ARC condition file in the external memory unit and restore.

The link servo float condition file of CMOS

 memory was damaged. The data stands for the file No. Initialize the link servo float condition file in the maintenance mode. Load the saved link servo float condition file in the external memory unit and restore. 4013 MEMORY ERROR (LINEAR SERVOFLOAT) [Decimal Data] The linear servo float condition file of CMOS memory was damaged. The data stands for the file No. Initialize the linear servo float condition file in the maintenance mode. Load the saved linear servo float condition file in the external memory unit and restore.

The robot calibration file of CMOS memory was damaged. 

The data stands for the file No. Initialize the robot calibration file in the maintenance mode. Load the saved robot calibration file in the external memory unit and restore. 4017 MEMORY ERROR (WELDER USER-DEF FILE) [Decimal Data] The welder user definition file of CMOS memory was damaged. The data stands for the file No. Initialize the welder user definition file in the maintenance mode. Load the saved welder user definition file in the external memory unit and restore. 4018 MEMORY ERR (LADDER PRG FILE) [Decimal Data] The ladder program file of CMOS memory was damaged. Initialize the ladder program file in the maintenance mode. Load the saved ladder program file in the external memory unit and restore. 4020 MEMORY ERROR (OPERATION ORIGIN FILE) [Decimal Data] The operation origin file of CMOS memory was damaged. The data stands for the file No. Initialize the operation origin file in the maintenance mode.

[Main Products]

Main products: PLC and DCS system spare parts modules of world famous brands

①Allen-Bradley 1756、1746、1747、1771、1785

②Schneider 140 Series PLC module

③General electric GE  IC693 IC697 IC698 Series PLC module

DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module

VMIVME Control module of series

④Bently：3500 series cards 3500/22M、3500/15、3500/92 And other products

⑤ICS TRIPLEX

⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。

⑦EMERSON：Spare parts for OVATION system, WDPF system and MAX1000 system.

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.

⑨Woodward：505 series governor 9907-164 And other products

⑩Bosch Rexroth：Indramat，I/O module,PLC CPU,Motors, drives and other products.

 ◆Motorola：MVME 162、MVME 167、MVME1772、MVME177and other products.