GE DS200SHCBG1A Gas turbine contact module

Synchronous Motors in Fieldweakening Range Synchronous motors suited for fieldweakening can be operated using this firmware in the fieldweakening range. This function must be activated in parameter P-0-0538, Motor function parameter 1. Customer Password The user himself/herself can select that parameter which is to be protected with a customer password. Those parameters that are to be protected can be entered in parameter S-0-0279, IDN-list of passwordprotected operation data. The default state of the parameters of S-0- 0192, IDN-list of backup operation data can be found there

Optional Setting of Absolute Dimension via the Zero Switch Input 

The “Set absolute dimension” command can be activated not only via parameter P-0-0012, C300 Command ’Set absolute measurement’, but also via the zero switch input. Parameter P-0-0612, Control word for setting absolute measurement was added in order to be able to alternate between this and the conventional method. This parameter also offers the user the option of switching the coordinate system (actual position value) immediately upon activation of command P-0-0012, C300 Command ’Set absolute measurement’ or not until after the start of command S-0-0148, C600 Drive controlled homing procedure command or upon removal of the drive enable.

Taking Cooling Mode into Consideration

 when Scaling the Torque/Force Data The way a motor is cooled changes the standstill or nominal current of the motor. All torque/force data of the drive are scaled in per cent values and relate to the standstill and / or nominal current of the motor. To obtain correct torque / force data for the various cooling methods of MDD, MKD and MHD motors, it is necessary to take the cooling method into account when scaling. A factor is defined via parameter P-0-0640, Cooling type that gives the peaking of the standstill and / or nominal currents.A low-pass filter with a filter time constant of 8 ms can be activated for parameter S-0-0040, Velocity feedback value via parameter P-0-0538, Motor function parameter 1.

 Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module