GE DS200EVIAG1B Contact DC module

Description: If "Absolute Positioning Commands" are selected while in "Command Controlled Operation" the control drive must be homed. If this is not the case, an absolute position cannot be reached. The drive rejects this positioning command and stops. The warning E254 will be given. Cause: Absolute positioning command was selected without the drive being referenced. Remedy: 1. Reference the drive 2. Select "Relative Positioning Command"

1. For protection against mechanical overload, the maximum torque can be limited by the "S-0-0092, Bipolar Torque Limit" parameter. If the actual value of this parameter is equal to 0, the motor does not develop torque and does not follow the command value which has been entered. 2. Torque reduction is set through an analog channel and the established current amounts to 10 V.

Feedrate-Override(S-0-0108) = 0 

The transversing velocity can be changed while jogging, homing and while in positioning operation with the "S-0-0108, Feedrate Override" parameter. Since the drive controller cannot follow command values which do not move, the warning will be given if the value of this parameter is 0. Cause: 1. Feedrate override is set at zero. 2. The "Feedrate Override Via Analog Output" field is activated and the voltage there is 0V. 3. Positioning speed = 0 Remedy: For 1. Set the S-0-0108 parameter to the correct value for the application. For 2. Deactivate the field or establish a voltage larger than 0V. For 3. Positioning speed greater than 0 must be selected.

Continuous Current Limiting Active 

The drive controller sets the peak current available for 400ms. Thereafter, the continuous current limit becomes active and dynamically limits the peak current to the continuous current. Cause: More continuous torque was required than was available. Remedy: 1. Check the drive installation. 2. Check the installation of the motor. For systems which have been in use for a long time, check to see if the drive conditions have changed (in regards to pollution, friction, components which have been moved, etc).

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.