GE DS200EXDEG1A Industrial electronic module

A positioning block was selected for which there is no set target position or positioning velocity, etc. Remedy: Select another positioning block or enter the required data.The velocity command value is limited to the value set in the S-0-0091, Bipolar Velocity Limit parameter when in the position and velocity control operating modes. This warning is given if the value in the S-0- 0036, Velocity Command Value parameter reaches this limit. Cause: S-0-0091, Bipolar Velocity Limit parameter was set too low. Remedy: In normal operation, set the S-0-0091, Bipolar Velocity Limit parameter to a value 10% higher than the NC operation velocity.

Current limitation active! 

The warning shows that the speed controller is entering its limit. This means that the acceleration capacity of the drive has been exceeded. In position control mode this means that there is an ever-increasing deviation between command and actual values (lag error). Remedy: • In position control, reduce parametrized accel value or speed value so that the drive can follow the position command value. • Increase torque limit value, if necessary.

Target Position Out of Range 

Cause: When using the operating mode "command controlled operation, the target position of the selected additive process block will be verified to see if it lies within the represented range. Remedy: 1. Check the target position and correct if necessary. 2. Select the position data display channel in modulo format.

For 1. Reduce the acceleration value and check the drive controller layout if necessary. Install an auxiliary bleeder, if necessary. For 2. Check the supply voltage, if necessary

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.