GE DS200FHVAG1A Sequence control card

The identification plate for the DKC drive controller is found on the front side of the casing. It contains all data related to this drive. The identification plate for MKD motors is on the right side of the motor (when looking at the motor shaft with the motor connection box on top). Assembled cables are supplied with a label (cable mark) that carries the cable number and the length of the assembled cable.The replacement component must have exactly the same typecode description as the component that was removed! To insure that this is the case, let INDRAMAT know the typcode description for the replacement component

Procedure for Exchanging Devices 

Danger of an accident with life-threatening voltage levels! ⇒ 1. Before working with electrical equipment, turn off the main switch and take steps to insure that it will not be switched on again. The drives must be at a stand still because motor rotations cause voltage to be generated back through the motor power cables. 2. Do not separate live connections

Pre-formed cables made by INDRAMAT (with connector) are identified with a model label. The label provides the ordering information (IKS 103 for the Feedback cable, for instance). 2. If cables are ordered without the connector, refer to the stamp on the cable sheathing (Engine Feedback Cable IN 488, for instance).

Procedure for Exchanging Devices

 Danger of an accident with life-threatening voltage levels! ⇒ 1. Before working with electrical equipment, turn off the main switch and take steps to insure that it will not be switched on again. The drives must be at a stand still because motor rotations cause voltage to be generated back through the motor power cables. 2. Do not separate live connections

Before making contact with the connecting lines and clamps, wait for the capacitor to discharge for at least 1 minute! Only then should you begin work with the connecting cables!

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.