GE DS200ACNAG1A Line interface module

Rexroth motors are documented according to the test criteria and measuring methods of EN 60034-1. The characteristic curves specified correspond to the operating modes S1 or S6.Electric parameters With a DC link voltage of 540 VDC and at the characteristic speed, the continuous torque that can be output is approx. ½ continuous torque at standstill. The continuous torque that can be output at the motor output shaft at a speed of n = 0. Phase current (crest value) of the motor required for the continuous torque at standstill MdN at a speed of n = 0.Maximum, briefly permissible phase current (crest value) of the motor without adverse affect on the permanent magnet circuit of the motor. Ratio of the increase in torque to the motor phase current (crest value) at a motor temperature of 20 °C. Unit: (Nm/A). Applicable up to approx. I = 2x IdN .

Voltage constant at 20 °C KE

Root-mean-square value of the induced motor voltage at a motor temperature of 20 °C and 1000 revolutions per minute. Unit: (V/1000 min–1 ). Winding resistance measured between two phases in ohms (Ω). Inductivity measured between two phases in (mH). Number of pole pairs of the motor. Typical useful speed defined by the manufacturer. Depending on the particular application, other useful speeds are possible (see speedtorque-curve). Continuous torque that can be output at the rated speed in operating mode S1. Phase current of the motor at the rated speed and load with rated torque, specified as root-mean-square value.

Mechanical parameters 

Maximum permissible speed of the motor. Limiting factors can have mechanical (centrifugal forces, bearing stress) or electrical (DC link voltage) causes. Maximum torque that can be output for approx. 400 ms at a peak current of Imax (guaranteed value which, owing to production tolerances, may be higher by 20%). The achievable maximum torque depends on the drive controller used. Only the maximum torque Mmax specified in the selection lists for the motor-controller combination are binding.

Root-mean-square value of the voltage to be applied to the motor, with the motor loaded with the rated torque and the rated speed. Unit (V). Frequency of the rated voltage at rated speed (Hz).

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.