GE DS200DPCAG1A Logical Sequence Card

The motor flange socket can be turned easily if an appropriate plug has been connected. Owing to the leverage of the connected plug, the flange socket can be turned manually to the desired output direction. Proceed as follows: 1. Connect the encoder cable to the flange socket. 2. Put the flange socket to the desired output direction by turning the connected cable. The desired output direction is set. Note: Whenever the flange socket is turned, the holding torque in the set position is reduced. To ensure the required holding torque of the flange socket, the output direction should be changed no more than 5 times!

It is not necessary to “rebuild” the flange socket 

(i.e. dismounting and mounting the flange socket, relocated by 90 degrees). The following problems and risks can arise should the flange socket be “rebuilt”: • The O-ring seal between the flange socket and the motor housing is not ensured any longer. • The tightening torques prescribed are, perhaps, not kept. • The TFL coating (screw locking element) of the locking screws will wear by unscrewing, thus becoming ineffective. Note: No warranty! • If the cable output direction is changed by “rebuilding” the flange socket, the warranty for the overall drive system given by Rexroth will expire. The cable output direction may only be changed by turning the flange socket.

Changing the output direction on MKD112

The output direction on MKD112 motors can be chosen. The output direction can be turned by 90°. To achieve this, proceed as follows: 1. Loosen the four locking screws on the top of the connector. 2. Turn the plug part with union nut in relation to the connector housing into the desired position (in increments of 90 degrees). 3. Retighten the locking screws (tightening torque: 0.8 Nm ±10%). 4. Ensure that, when retightening the screws, cable strands and the seal are prevented from being damaged.In case of applications with high vibration and shock loads, the angular connector must be secured against loosening by means of screw locking adhesive.

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.