Home > Product > Gas turbine system > GE DS200SDCCG4AGD Digital signal card

  • GE DS200SDCCG4AGD Digital signal card
GE DS200SDCCG4AGD Digital signal card

GE DS200SDCCG4AGD Digital signal card

GE DS200SDCCG4AGD Digital signal card

These ports can each support multiple protocols simultaneously. • Modbus RTU Slave, packaged as a serial stream on Ethernet. This is appropriate for conversion to serial Modbus at terminal servers or for the Trusted OPC servers and SOE/Process Historian collector. Up to ten connections can be made to Ethernet slaves, and the port only needs to be allocated once. Port 2000 is used by default. The slave can either actively make a connection (appropriate for some terminal servers) or wait for a connection. • Open Modbus Transport Control Protocol (TCP), an Ethernet Modbus protocol designed by Modicon. This will automatically operate if port 502 is selected. Only Modbus Slave is available on this protocol.

• Modbus RTU Master

 packaged as a serial stream on Ethernet. This is enabled by fitting a T8122 or T8123 Processor Interface Adapter. The Master only makes one connection, so it may connect to one Ethernet based slave or to one chain of slaves on a serial link via a terminal server. Each CI can control up to 16 Modbus Masters, communicating with up to 64 Slaves total, with up to 400 messages total. Each Master, Slave and message can be individually controlled and monitored, including statistical data. A Modbus Master can also broadcast messages to some or all Slaves simultaneously.

Rear Serial Ports 

These ports may be configured between 1200 and 115200 baud. All four ports support RS485, port 1 supports RS232 with full handshaking and port 2 supports RS232 without handshaking. These ports can be allocated as a Modbus Remote Terminal Unit (RTU) Slave or Master (Modbus Master requires a T8122 or T8123 Processor Interface Adapter).SOE over Modbus protocol. A section of the Modbus address map is used as an event buffer for SOE events (not Process Historian). This requires programming in the remote end to poll the data block (with a Modbus Master) and interpret the events. This can provide a faster event transfer than the protocol used by the OPC server and SOE collector.

                                        

Our superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switch

EPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM card

MOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit

Obtain the latest price of GE DS200SDCCG4AGD Digital signal card