Home > Product > DCS control system > ABB 5720001-EV DSCS 140 Current input card

  • ABB 5720001-EV DSCS 140 Current input card
ABB 5720001-EV DSCS 140 Current input card

ABB 5720001-EV DSCS 140 Current input card

ABB 5720001-EV DSCS 140 Current input card

Changes made to the SNTP configuration do not become active until after a power cycle.  SOE Reference variables connected to SOE events are not reported by the OPC Portal Server.  Not recognizing Software Licenses Windows 64-bit versions of the operating software will not recognize Workbench soft (hard drive) licenses; Workbench licenses on USB dongles are recognized.

These rules apply to this release:  T9110 (and T9120) processors and Workbench MUST be from the same Product Release (i.e. R1.33).  Workbench licenses: the versions tested are those in the list (given earlier in the document).  AADvance Workbench licenses R1.2 and later can be used; earlier license versions are not compatible.  Analogue output modules must use Release 1.33 firmware.

Product Description 

Discrete input modules IC200MDL640 and BXIOID1624 provide two groups of 8 discrete inputs. Discrete input module IC200MDL650 (shown below) and BXIOIX3224 provide four groups of 8 discrete inputs. Inputs in each group can be either positive logic inputs that receive current from input devices and return the current on the common, or negative-logic inputs that receive current from the common and return current to the input device. Input devices are connected between the input terminals and common terminals

Preinstallation Check 

Carefully inspect all shipping containers for damage. If any equipment is damaged, notify the delivery service immediately. Save the damaged shipping container for inspection by the delivery service. After unpacking the equipment, record all serial numbers. Save the shipping containers and packing material in case it is necessary to transport or ship any part of the system. (total response time is 1.5ms).Note: Negative-logic functionality requires module version IC200MDL650C / BXIOID3225C or higher. Power for module operation comes from the backplane. Intelligent processing for the module is performed by the CPU or NIU. LED Indicators Individual green LEDs indicate the on/off state of each input point. The green OK LED is on when backplane power is present to the module


                                        

Our superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switch

EPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM card

MOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit


Obtain the latest price of ABB 5720001-EV DSCS 140 Current input card