ABB 5716075-K DSDX 451 Channel isolation card

Connect your PC to the Processor 1 Connect the right-angle connector end of the cable to your controller at the communications port.2 Connect the straight connector end of the cable to the serial port on your computer.Download the Sample Program to the Processor ¾ To download the sample program from RSLogix 5 to the PLC processor: Note: The key switch on the front of the PLC processor must be in the REM position. 1 If you are not already online to the processor, open the Communications menu, and then choose Download. RSLogix will establish communication with the processor.2 Click the Download button to transfer the sample program to the processor. 3 When prompted, choose Computer to PLC

Configuring RSLinx ¾

 If RSLogix is unable to establish communication with the processor, follow these steps: 1 Open RSLinx. 2 Open the Communications menu, and choose Configure Drivers.If the list of configured drivers is blank, you must first choose and configure a driver from the Available Driver Types list. The recommended driver type to choose for serial communication with the processor is "RS-232 DF1 Devices". 3 Click to select the driver, and then click Configure. This action opens the Configure Allen-Bradley DF1 Communications Device dialog box.Click the Auto-Configure button. RSLinx will attempt to configure your serial port to work with the selected driver. 5 When you see the message "Auto Configuration Successful", click the OK button to dismiss the dialog box. Note: If the auto-configuration procedure fails, verify that the cables are connected correctly between the processor and the serial port on your computer, and then try again. If you are still unable to auto-configure the port, refer to your RSLinx documentation for further troubleshooting steps.

Installing and Configuring the Module

This chapter describes how to install and configure the module to work with your application. The configuration process consists of the following steps. 1 Use RSLogix 5 to identify the module to the processor and add the module to a project. NOTE: The RSLogix 5 software must be in "offline" mode to add the module to a project. 2 Modify the example ladder logic to meet the needs of your application, and copy the ladder logic to the processor. Example ladder logic files are provided on the CD-ROM. Note: If you are installing this module in an existing application, you can copy the necessary elements from the example ladder logic into your application.

Quality assurance service

1. We provide high-quality parts of various brands, and you will find full

The model meets your needs.

2. For models that have been out of production for many years, we have all hard to find parts, so we can directly find us to solve all problems for you at one time.

3. If you are in a hurry to use this product, we can dispatch it for you.

4. All products can enjoy a one-year warranty service,

5. Our products are new and unused.

6. If you need a large quantity, you can contact us and I can offer you a discount.

7. You can ask me about the price and more information about the product via email. We welcome you