ABB PFRL101D 5.0KN Tension sensor

… IEEE802.3 Ethernet standard 

… Provides 10Base5 compliant communication via AUI … 32-bit data bus 

… Transmission rate 10 MBit/s 

… Direct memory access to main memory, < 4% CPU overhead for operation 

… Optional battery for redundant battery backup of main memory Description These communication modules provide Ethernet communications to the system bus compliant with IEEE802.3 standard. Communications module, to connect a commercial transceiver with AUI connector (15-pin female plug DIN 41652).

No supply voltage, module is isolated Green Power supply on, module identified and ready to operate as configured. Orange Power supply on, module identified and either: — normal transitory state after module startup Power supply on, module identified; module not connected to proper bus structure. Red Power supply on and either: Page 10 June 2006 — module not yet identified (normal for short time during module startup) — error occurred during module test Batt. Low Off Sufficient buffer battery voltage. Orange Buffer battery not found or low (insufficient voltage).

These communication modules provide

 Ethernet communications to the system bus compliant with IEEE802.3 standard. Communications module, compliant with 10BaseT shielded Twisted Pair (STP, cable category 3, 4 or 5 advanced) LED Displays State Off No supply voltage, module is isolated Green Power supply on, module identified and ready to operate as configured. Orange Power supply on, module identified and either: — normal transitory state after module startup — configuration mode of Boot Loader Orange flashing Power supply on, module identified; module not connected to proper bus structure. Red Power supply on and either: — module not yet identified (normal for short time during module startup) — error occurred during module test Batt. Low Off Sufficient buffer battery voltage. Orange Buffer battery not found or low (insufficient voltage).

Front Panel Connections 

RJ-45 female connector (shielded).There are two integrated LEDs indicating the current communication status. The LEDs are not labeled but can be identified by their color. The upper yellow LED indicates the link state, the lower green LED indicates active communication.These communication modules provide Ethernet communications to the system bus compliant with IEEE802.3 standard. Communications module, compliant with 10Base2 (Cheapernet) for thin coax cable installations.No supply voltage, module is isolated Green Power supply on, module identified and ready to operate as configured. Orange Power supply on,

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions