ABB LDSTA-01 Adjustment control card

Service Set Identifier (SSID) is a name assigned to a wireless network. Repeaters and Clients must be configured with the same SSID to connect. Note that Master radios typically advertise their presence by broadcasting their SSID. However, SSID announcements can be disabled so that other wireless devices do not detect such Masters, If a Master is not transmitting its SSID, this field will indicate Hidden along with the SSID, for example ProSoft/hidden.A Connection state is only shown for repeaters. Scanning is shown while the radio is searching for a master. Connected is shown for repeaters that have linked to a master.

The signal strength

 in dBm of a Repeater or Client device’s link to a Master. Master devices do not report signal strength. Hops The number of wireless connections a device is away from the wired connection of a Master. This value is always 1 for a Master radio. For Repeater devices is it a minimum of 2, but can be higher if there are additional hops to the Master. Client devices do not display a hop value. Parent The MAC address of the Parent radio to which this Repeater or Client is linked. Not shown for Master devices. Associations The number of network elements to which a radio has a wireless connection.

The number of device to which this device has a wireless connection.

 For example, if one Repeater and one Client are linked to a Master, the Master shows 2 in this field, and the other devices show 1. Tx (kbits/sec) This is a moving average of transmit throughput in kilobits/second. It does not count packet overhead, only payload data. Rx (kbits/sec) This is a moving average of receive throughput in kilobits/second. It does not count packet overhead, only payload data. FW Ver Firmware version number. For Network interfaces, this is the version of the communication engine in the IH Browser. For radios, this is the version of the firmware code in the radio. This is not the version of the image file installed into the radio (for that information see Image Ver described below). .

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions