REXROTH R911190045 HDS03.2-W100N-HT20-01-FW drive

The MVME187 supports the MVME712-12, MVME712-13, MVME712M, MVME712A, MVME712AM, and MVME712B transition modules (referred to in this manual as MVME712X, unless separately specified). Note Other modules in the system may have to be moved to allow space for the MVME712M which has a doublewide front panel. MVME712X transition modules provide configuration headers and industry-standard connectors for internal and external I/O devices. The I/O on the MVME187 is connected to the VMEbus P2 connector.Some cable(s) are not provided with the MVME712X module(s), and therefore must be made or provided by the user. (Motorola recommends using shielded cables for all connections to peripherals to minimize radiation.)

Equipment Connections 

Some connection diagrams are in the Single Board Computer Programmer's Reference Guide. The MVME712X transition modules and P2 adapter boards connect peripheral equipment to the MVME187 as shown in Table 3-10.Set jumpers on the transition module(s) and install SCSI terminators (if needed) on the P2 adapter board Connect and install the MVME712X transition module in the front or the rear of the chassis. Installation Instructions in the user’s manual for your transition module and adapter board ❏ The P2 adapter board at the P2 connector on the backplane at the MVME187 slot. Installation Instructions in the user’s manual for your transition module and adapter board

Connecting Peripherals

Set up the terminal as follows: ❏ eight bits per character ❏ one stop bit per character ❏ parity disabled (no parity) ❏ baud rate 9600 baud (default baud rate of MVME187 ports at powerup) After power-up, the baud rate of the debug port can be reconfigured by using the Port Format (PF) command of the 187Bug debugger. Connect devices such as a host computer system and/or a serial printer to the other EIA-232-D port connectors with the appropriate cables and configuration. After power-up, these ports can be reconfigured by programming the MVME187 CD2401 Serial Controller Chip (SCC), or by using the 187Bug PF command.

Connect a parallel device, such as a printer, to the printer port on the MVME712X transition module. (You may also use a module such as the MVME335 for a parallel port connection.)

 About us

We are professional company and we are expert in this business, we have highly experienced production team, or sales team, or purchase team, we have most advanced production line. We are reputable in the market.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components