WOODWARD 5466-411 Signal output module

Connect the specified cable(s) to the MVME188A at its J3 and/or J4 female 9- pin front-panel connector(s), or to P2 on the backplane at the system controller board slot (first or leftmost MVME188A slot), to mate with (optional) terminals or other peripherals at the EIA-232-D serial ports. Refer to the Tenninal Connection section that follows. This cable is not provided with the MVME188A module, and therefore is made or provided by the user. (Motorola recommends using shielded cables for all connections to peripherals to minimize radiation, and can furnish cables for Motorola chassis.) Connect the peripherals to the cable. i. Install any other required VMEmodules in the system. j. Replace chassis cover(s) and/or access doors as instructed in the equipment user's manual. k. Connect power cable to ac power source and tum equipment power ON.

Test using EPROM-resident 

MVME188Diag diagnostics, including at least one pass of SST memory diagnostics. Get out of system mode by entering Menu # 3) Go to System Debugger. This takes the system to the system debugger, MVME188Bug (188Bug); as indicated by the diagnostic mode prompt, 188Diag>. Proceed as follows. m. If needed, reconfigure the NVRAM (BBRAM) per the new HYPERmodule and/or new memory board configuration. The ENV command allows the user to interactively view/configure all 188Bug operational parameters kept in battery backed up RAM (BBRAM), also called non-volatile RAM (NVRAM). The operational parameters are saved in NVRAM and used whenever power is lost

Any time the 188Bug uses a parameter from NVRAM

 the NVRAM contents are first tested by checksum to insure the integrity of the NVRAM contents. In the instance of BBRAM checksum failure, certain default values are assumed. o. The 188Bug operational parameters (which are kept in NVRAM) are not initialized automatically on power up/warm reset. It is up to the 188Bug user to invoke the ENV command. Once the ENV command is invoked and executed without error, 188Bug default and/or user parameters are loaded into NVRAM along with checksum data. If any of the operational parameters have been modified, these new parameters are not in effect until a reset/powerup condition. Refer to the MVME188Bug Debugging Package User's Manual for further information

 About us

We are professional company and we are expert in this business, we have highly experienced production team, or sales team, or purchase team, we have most advanced production line. We are reputable in the market.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components