ICS TRIPLEX T3404 Pulse input module

A key feature of the MVME2603/2604 family is the PCI (Peripheral Component Interconnect) bus. In addition to the on-board local bus peripherals, the PCI bus supports an industry-standard mezzanine interface, IEEE P1386.1 PMC (PCI Mezzanine Card). PMC modules offer a variety of possibilities for I/O expansion through FDDI (Fiber Distributed Data Interface), ATM (Asynchronous Transfer Mode), graphics, Ethernet, or SCSI ports. The base board supports PMC front panel I/O. There is also provision for additional expansion via a PMC carrier board.

The SCSI bus is 16-bits wide in systems that support the VME64 extension (that is, those equipped with 5-row, 160-pin VME backplane connectors). The SCSI bus is 8-bits wide in VME systems that do not support the extension. Refer to the MVME712M User’s Manual, listed in Appendix D, Related Documentation, for the pin assignments of the SCSI connectors used on the transition module. Refer to the Symbios 53C825A data manual for detailed programming information, also listed in Appendix D, Related Documentation.

SCSI Interface 

The MVME2603/2604 VME module supports mass storage subsystems through the industry-standard SCSI bus. These subsystems may include hard and floppy disk drives, streaming tape drives, and other mass storage devices. The SCSI interface is implemented using the Symbios 53C825A SCSI I/O controller at a clock speed of 40 MHz. The SCSI I/O controller connects directly to the PCI local bus. The MVME2603/2604 routes its SCSI lines through the P2 connector to the MVME712M transition module (as illustrated in Figure 1-21 on page 1-47). The SCSI control lines have filter networks to minimize the effects of VMEbus signal noise at P2.

SCSI Termination 

The individual configuring the system must ensure that the SCSI bus is properly terminated at both ends. In MVME712M I/O mode, the MVME2603/2604 base board uses the sockets provided for SCSI bus terminators on the P2 adapter board used with the MVME712M. If the SCSI bus ends at the adapter board, termination resistors must be installed there. +5V DC power to the SCSI bus TERMPWR signal and termination resistors is supplied through a fuse located on the adapter board. In MVME761 I/O mode, the P2 adapter board used with the MVME761 has a jumper to enable/disable SCSI bus terminators. +5V DC power for SCSI termination is supplied through a polyswitch located on the adapter board.

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

 Superior products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands