Home > Product > PLC programmable module > ICS TRIPLEX T3510 controller

  • ICS TRIPLEX T3510 controller
ICS TRIPLEX T3510 controller

ICS TRIPLEX T3510 controller

ICS TRIPLEX T3510 controller

In MVME712M I/O mode, the MVME2603/2604 supplies SCSI terminator power through a 1A fuse (F1) located on the P2 adapter board. If the fuse is blown, the SCSI device(s) may function erratically or not at all. With the P2 adapter board cabled to a transition module and with an SCSI bus connected to the transition module, the green SCSI LED on the module illuminates when SCSI terminator power is available. If the SCSI LED on the transition module flickers during SCSI bus operation, check fuse F1 on the P2 adapter board. Note Because any device on the SCSI bus can provide TERMPWR, and because the FUS LED monitors the status of several voltages, the LED does not directly indicate the condition of any single fuse. If the LED flickers or goes out, check all the fuses (polyswitches). In MVME761 I/O mode, the MVME2603/2604 supplies SCSI terminator power through a polyswitch (resettable fuse) located on the P2 adapter board.

PM603/604 Processor 

At present, you have the choice of a PowerPC 603 or a PowerPC 604 processor chip with 16MB to 256MB of ECC DRAM, 256KB of level 2 cache (L2 cache), and up to 9MB of Flash memory. The L2 cache and 1MB of 16-bit Flash memory reside on the MVME2603/2604 base board. The ECC DRAM and 4MB or 8MB of additional (64-bit) Flash memory are located on the RAM200 memory mezzanine. The PowerPC 603 is a 64-bit processor with 32KB on-chip cache (16KB data cache and 16KB instruction cache). The PowerPC 604 is a 64-bit processor with 32KB on-chip cache (16KB data cache and 16KB instruction cache).

Speaker Control 

The MVME2603/2604 base board supplies a SPEAKER_OUT signal to the 14-pin combined LED-mezzanine/remote-reset connector, J1. When J1 is used as a remote reset connector with the LED mezzanine removed, the SPEAKER_OUT signal can be cabled to an external speaker to obtain a beep tone. For the pin assignments of J1, refer to Table 4-1 in Chapter 4, Connector Pin Assignments.

                                                      

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

 Superior products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

Obtain the latest price of ICS TRIPLEX T3510 controller