Home > Product > PLC programmable module > BENTLY 3500/25-A01-B01-C00 Channel temperature module

  • BENTLY 3500/25-A01-B01-C00 Channel temperature module
BENTLY 3500/25-A01-B01-C00 Channel temperature module

BENTLY 3500/25-A01-B01-C00 Channel temperature module

BENTLY 3500/25-A01-B01-C00 Channel temperature module

If the server has only RARP capability, you need to specify the name of the boot file, either by the command line or the configuration parameters (see the NIOT command). Prior to the TFTP phase an ARP request is transmitted for the hardware address (Ethernet) of the server. At selected times (when prompted or a time-out condition exists), the booting process can be aborted by pressing thekey on the console keyboard or by pressing theswitch on the front panel. Note that certain arguments are passed (through MPU registers) to the loaded program; the following is a list of the MPU registers and their contents: MC68000.A0 = Base Address of Controller/Device 

boot file. Refer to the DARPA Internet 

Request for Comments RFC951 and RFC-783, respectively, for the description of these protocols. You may skip the BOOTP phase (address determination and bootfile selection) by specifying the IP addresses (server and client) and the boot filename; the booting process would then start with the TFTP phase (file transfer) of the boot sequence.Whenever an error occurs, the booting process is terminated and the error code is displayed. The error codes are listed in Appendix H.

In this example no arguments were specified. 

Depending on the interface's configuration parameters, the display of various IP addresses and the boot file name signifies that the BOOTP phase was successful. The booting process now halts and waits about 5 seconds for you to abort. If you do not abort, a carriage return and line feed are printed to signify the entrance into the TFTP phase of the boot process. Once this phase is started, you cannot abort (by pressing thekey) unless a time-out condition arises. When the boot file is loaded into the user memory, the statistics of the TFTP phase (file transfer) are displayed. The boot process continues with loading of the MPU registers and execution of the loaded file.  

                                                      

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

 Superior products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

Obtain the latest price of BENTLY 3500/25-A01-B01-C00 Channel temperature module