HONEYWELL 51306521-175 CC-TAON11 base

Offset Register Rules 1. At power-up and cold start reset, R7 is the automatic register. 2. At power-up and cold start reset, all offset registers have both base and top addresses preset to 0. This effectively disables them. 3. R7 always has both base and top addresses set to 0; it cannot be changed. 4. Any offset register can be set as the automatic register. 5. The automatic register is always added to every absolute address argument of every 16XBug command where there is not an offset register explicitly called out. 6. There is always an automatic register. A convenient way to disable the effect of the automatic register is by setting R7 as the automatic register. Note that this is the default condition.

Printer Attach/Detach

These two commands "attach" or "detach" a printer to the userspecified port. Multiple printers may be attached. When the printer is attached, everything that appears on the system console terminal is also echoed to the "attached" port. PA is used to attach, NOPA is used to detach. If no port is specified, PA does not attach any port, but NOPA detaches all attached ports. If the port number specified is not currently assigned, PA displays an unassigned message. If NOPA is attempted on a port that is not currently attached, an unassigned message is displayed. The port being attached must already be configured. This is done using the Port Format (PF) command. This is done by executing the following sequence prior to "PA port"

Port Format/Detach

Port Format (PF) allows you to examine and change the serial input/output environment. PF may be used to display a list of the current port assignments, configure a port that is already assigned, or assign and configure a new port. Configuration is done interactively, much like modifying registers or memory (RM and MM commands). An interlock is provided prior to configuring the hardware -- you must explicitly direct PF to proceed. The serial ports that are labeled "DEBUG" (LUN 0), "HOST" (LUN 1), and "Console" (LUN dependent, "DEBUG" LUN by default) by the debugger are special in that the configuration parameters of these ports are saved/retained in Battery Backed Up RAM (BBRAM), also known as Non-Volatile RAM (NVRAM). These configuration parameters remain in effect through power-up or any reset. The "DEBUG" and "HOST" LUNs are local serial ports, 0 and 1 respectively. If the "Console" port of the debugger is moved (refer to the TA command) from the default "Console" port ("DEBUG" LUN) to some other port

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

 Superior products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands