Home > Product > DCS control system > FOXBORO IPM03A P0904HB Channel isolation card

FOXBORO IPM03A P0904HB Channel isolation card

To select the desired configuration and ensure proper operation of the MVME712x module, certain changes may be made before installation. These changes are made through jumper arrangements on the headers. The locations of the headers and connectors for the MVME712x are illustrated in Figure 2- 1 through Figure 2-4. The modules have been factory tested and are shipped with factory-installed jumper configurations that are shown in the following paragraphs with each header description. The modules are operational with the factory-installed jumpers. The modules are configured to provide the system functions required for a VMEbus system. Changes may be made for the following reasons: ❏ DSR Line Pull Up Select (J8, J9, J13, J14) ❏ Serial Port 2/Modem Port 2 Select (J16, J17) ❏ Hardwired as DTE (to modem). With the exception of the DSR line, no headers are provided on the module to change this configuration. To use the module as DCE (to terminal), a null modem cable must be attached.

Because the MVME712x

has no provision for SCSI connection, you must ensure that the SCSI bus is terminated properly. The LCP2 adapter has sockets (R1, R2, R3) for terminating the SCSI lines using three 8-pin SIP resistors. Refer to the Installation Instructions for use of the terminators.Preparation of the LCP2 adapter consists of removing or replacing the terminating resistors for SCSI. The location of the resistors, fuse, and connectors is illustrated in Figure 2-6. Refer to the Installation Instructions for use of the terminators.

Installation Instructions

The basic procedure for installation of the family of MVME712 modules and the LCP2 adapter is as follows: 1. Turn all equipment power OFF and disconnect the power cable from the AC power source. Caution Connecting modules while the power is applied may result in damage to components on the module. ! WARNING Dangerous voltages, capable of causing death, are present in this equipment. Use extreme caution when handling, testing, and adjusting

product application

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on

Superior products

--ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100