Home > Product > DCS control system > TRICONEX MP6004 Temperature monitor card

  • TRICONEX MP6004 Temperature monitor card
TRICONEX MP6004 Temperature monitor card

TRICONEX MP6004 Temperature monitor card

TRICONEX MP6004 Temperature monitor card

Make sure that cables will not be pinched by the cover and install the cover that you previously removed. 8. Connect the power cable to the AC power source and turn the unit on. 9. The LED (DS1, toward the serial ports) on the MVME712M should be lit (the LED can be seen through the opening in the front panel). If not lit, then either a cabling problem exists, a fuse is blown, or both. If it is a cabling problem, then fix it. If not, check the fuse on the MVMExxxx module, and replace if necessary. The fuse on the MVMExxxx is for Ethernet transceiver power. The resistance of this fuse should be less than 1 ohm.

Insert the MVME712M module

 into the selected slots and tighten the attaching screws, making good contact with the transverse mounting rails to minimize RF emissions.Make sure that cables will not be pinched by the cover and install the cover that you previously removed.Connect the power cable to the AC power source and turn the unit on.Both LEDs (DS1 and DS2) on the MVME712M should be lit (the LEDs can be seen through the opening in the front panel). If not lit, then either a cabling problem exists, a fuse is blown, or both. If it is a cabling problem, then fix it. If not, check the fuse on the P2 adapter module and on the MVMExxxx module, and replace if necessary. The fuse on the P2 adapter module is for SCSI terminator power. The fuse on the MVMExxxx is for Ethernet transceiver power. The resistance of each fuse should be less than 1 ohm

Both LEDs (DS1 and DS2) on the MVME712M 

should be lit (the LEDs can be seen through the opening in the front panel). If not lit, then either a cabling problem exists, a fuse is blown, or both. If it is a cabling problem, then fix it. If not, check the fuse on the P2 adapter module and on the MVMExxxx module, and replace if necessary. The fuse on the P2 adapter module is for SCSI terminator power. The fuse on the MVMExxxx is for Ethernet transceiver power. The resistance of each fuse should be less than 1 ohm.

                                                      

product application

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on

Superior products

--ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!



Obtain the latest price of TRICONEX MP6004 Temperature monitor card