ABB 3BHE021951R0124 Drive input card

The VMIVME-7805/VME-7805RC provide power to the PMC site in accordance with the PMC specification. The maximum current provided on the +5 V supply is 1.5 A per PMC site. The maximum current provided on the +3.3 V supply is 1.5 A per PMC site.The VMIVME-7805/VME-7805RC conform to the VME physical specification for a single slot 6U Eurocard (dual height). It can be plugged directly into any standard chassis accepting this type of board.

The following steps describe the GE 

recommended method for VMIVME-7805/ VME-7805RC installation and power-up: 1. Make sure power to the equipment is off. 2. Choose chassis slot. The VMIVME-7805/VME-7805RC must be attached to a P1/P2 VME backplane. If the VMIVME-7805/VME-7805RC are to be the VME system controller, choose the first VME slot. If a different board is the VME system controller, choose any slot except slot one. The VMIVME-7805/VME-7805RC do not require jumpers for enabling/disabling the system controller function.3. Connect all needed peripherals to the front panel. Each connector is clearly labeled on the front panel, and detailed pinouts are in Appendix A: Connectors and Pinouts, page 52. Minimally, a keyboard and a monitor are required if the user has not previously configured the system. 

 Apply power to the system.

 Several messages are displayed on the screen, including names, versions and copyright dates for the various BIOS modules on the VMIVME-7805/VME-7805RC.The VMIVME-7805/VME-7805RC feature an optional CompactFlash resident on the board. Refer to Chapter 3 Embedded PC/RTOS Features, page 39 for set up details. 6. If an external drive module is installed, the BIOS Setup program must be run to configure the drive types. See Appendix B: AMI BIOS Setup Utility, page 62 to properly configure the system. 7. If a drive module is present, install the operating system according to the manufacturer’s instructions. See Appendix C: OS and System Driver Software, page 70 for instructions on installing VMIVME-7805/VME-7805RC peripheral driver software during operating system installation

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

Application industry

Our main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mine, paper making and printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.