Maintenance and cleaning The device does not require maintenance. Opening the device voids the warranty. The inside of the unit can only be cleaned by the manufacturer. Do not immerse or spray the device. Avoid that liquid enters the device. To clean the device exterior: 1. Decommission the device (see chapter 2.3.4 "Decommissioning"). 2. Casing: Clean with isopropanol or similar cleaning solution. Caution: Highly Flammable! Risk injury by explosion and fire. Observe the safety notes given on the cleaning liquid package. Wait at least 30 minutes after cleaning before putting the device back into operation. 3. Protective grill on fan: Clean with a dry brush.
Disassemble
Only professional staff who are qualified in electrical engineering are allowed to disassemble parts of the drive system. 1. Decommission the device (see chapter 2.3.4 "Decommissioning"). 2. Check temperature. CAUTION: During operation, the heat sink of the drive may reach temperatures above 80 °C (176 °F). Risk of minor burns. Before touching the device, check the temperature and wait until it has cooled below 40 °C (104 °F). 3. Remove the connectors. Disconnect the potential earth connection last. 4. Demount: loosen the fastening screws. Remove the device.
System Repair
Only professional staff who are qualified in electrical engineering are allowed to exchange parts of the drive system. CAUTION: Automatic Start! During replacement work a combination of hazards and multiple episodes may occur. Work on the electrical installation may only be performed by trained and qualified personnel, in compliance with the regulations for safety at work, and only with use of prescribed personal safety equipment.
Superior products
ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series
BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables
Emerson -- modbus card, power panel, controller, power supply, base, power module, switchEPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor
FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch
GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA --- DI module, processor module, AI card, pulse encoder
Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM cardMOOG - servo valve, controller, module, power module
NI --- Information acquisition card, PXI module, card, chassis multi-channel control card
WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward - Regulator, module, controller, governor
YOKOGAWA - Servo module, control cabinet node unit